Lindon Foundation Pros logoLindon Foundation ProsFoundation Repair · Lindon, UT
Driveway Lifting photo

Lindon Foundation Pros

Driveway Lifting in Lindon, UT

Driveway lifting in Lindon fixes sunken slabs with polyurethane foam injection, same-day results and a free estimate.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Lindon and nearby communities.

A sunken driveway slab near the garage apron is usually a sign that the base material underneath has washed out or settled, not that the concrete itself has failed. Lindon Foundation Pros fixes this with polyurethane foam injection through dime-sized drill holes, lifting the slab back to grade without tearing out and repouring concrete. Freeze-thaw cycling along the Wasatch Front speeds up this kind of settling, especially on driveways that slope toward the garage instead of away from it.

Most driveway lifts are a same-day job. We identify the low section, drill a few small access points, pump foam underneath until the slab rises and matches the adjoining panels, then patch the holes so the surface looks consistent.

What's included

What's Included With Driveway Lifting

Typically included: slab inspection and void mapping, drilling and foam injection, elevation checks during the lift, hole patching and surface cleanup.

Optional: joint resealing between panels, slope correction to redirect water away from the garage.

Customer prep: move vehicles off the driveway and clear any items stored along the edge before the crew arrives.

How it works

How Our Driveway Lifting Process Works

  1. Driveway Inspection photo
    Step 1

    Driveway Inspection

    Sunken or sloped sections are identified for correction.

  2. Access Drilling photo
    Step 2

    Access Drilling

    Small holes are drilled at strategic points along the driveway.

  3. Foam Injection photo
    Step 3

    Foam Injection

    Expanding foam is pumped beneath the slab to raise it evenly.

  4. Slope Correction photo
    Step 4

    Slope Correction

    The surface is adjusted to restore proper drainage direction.

  5. Hole Sealing photo
    Step 5

    Hole Sealing

    Drilled holes are patched to blend with the existing surface.

  6. Surface Review photo
    Step 6

    Surface Review

    The driveway is inspected for even, stable elevation.

Materials

Materials and Methods for Driveway Lifting

Lindon driveways see repeated freeze-thaw movement each winter, so we lean on lightweight, fast-curing materials that won't add extra load to already-compromised base soil.

  • Polyurethane Foam photo

    Polyurethane Foam

    Provides lightweight lift without adding excess weight to the soil, a real advantage over mudjacking slurry on marginal base material.

  • Concrete Patch Mix photo

    Concrete Patch Mix

    Used to seal access holes after injection work so the surface reads clean.

  • Joint Sealant photo

    Joint Sealant

    Reseals expansion joints disturbed during the lifting process to keep water out of the joint line.

  • Surface Sealer photo

    Surface Sealer

    Protects the driveway from moisture and future cracking through freeze-thaw seasons.

  • Leveling Equipment photo

    Leveling Equipment

    Ensures accurate measurement during the lifting procedure so panels match height.

  • Bonding Primer photo

    Bonding Primer

    Improves patch adhesion to the original concrete surface for a durable repair.

Timeline

How Long Does a Driveway Lifting Take?

Driveway lifting is one of the faster jobs we run, start to finish in a single visit for most homes.

  1. 01

    Inspection

    same day
  2. 02

    Drilling and injection

    1–3 hours

    depending on slab size

  3. 03

    Foam cure time

    about 15 minutes before the driveway can bear weight

  4. 04

    Patch and cleanup

    same visit

Need a schedule that fits?

Get a Free Estimate

Codes & permits

Permits and Codes for Driveway Lifting

Permit rules vary by situation. Confirm specifics with the Utah County building department before scheduling work.

Typically needs a permitOften no permit
Driveway replacement that changes grade or width at the right-of-wayFoam lifting of an existing driveway slab to restore its original grade
—Patching and resealing access holes after injection

DIY vs pro

DIY vs Hiring a Pro for Driveway Lifting

DIYHire a pro
Monitoring a small crack for change over a seasonLifting a sunken slab evenly, which requires controlled foam placement most homeowners can't replicate with rented equipment
Resealing visible joints with store-bought caulk as routine maintenanceCorrecting slope so water drains away from the garage instead of toward it

When to call

When to Call for Driveway Lifting

Call Lindon Foundation Pros for a free estimate before a small dip turns into a bigger settling problem. <!-- rover-autofix-links -->

  • A slab edge has dropped noticeably near the garage threshold
  • Water pools on the driveway instead of running toward the street
  • You've noticed a gap opening up between the driveway and the garage floor
  • [Home](/)
  • [Contact](/contact)

Next step

Get a Driveway Lifting Estimate in Lindon

Call (435) 325-2652 or request a free estimate and we'll take a look at your driveway before the next freeze-thaw cycle makes it worse.

Before & after

Before and After Driveway Lifting

  • Driveway Lifting photo
    Before
  • Driveway Lifting photo
    After

FAQs

Driveway Lifting FAQs

How much does driveway lifting cost in Lindon?

Most single-panel lifts run a few hundred to just over a thousand dollars depending on slab size and how much foam is needed to fill the void underneath.

How long does a driveway lift take?

A typical driveway lift is a same-day job, usually a few hours from drilling to patch.

Will the repaired spots be visible?

Patched holes are smoothed and blended, though slight color variation is common with older concrete until it weathers to match.

Is polyurethane foam strong enough for a driveway?

It's engineered to support vehicle weight once cured, and it adds less load to soft soil than traditional mudjacking slurry.

Can I DIY a sunken driveway fix?

Store-bought patch products cover the surface but don't fill the void underneath, so the slab usually settles again within a season or two.

Do I need a permit for driveway lifting?

Foam lifting of an existing slab typically doesn't require a permit, but confirm with Utah County if you're also changing the driveway's footprint.

Ask about Driveway Lifting

Tell us about the project and how to reach you.

Call (435) 325-2652