Lindon Foundation Pros
Foundation Crack Repair in Lindon, UT
Foundation crack repair in Lindon seals cracks with epoxy or polyurethane injection, not surface caulk. Free estimates available.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Lindon and nearby communities.
Not every foundation crack means trouble, but the difference between a cosmetic shrinkage crack and a structural one matters before you decide what to do about it. Foundation crack repair starts with identifying the crack type, then sealing it the full depth with epoxy or polyurethane injection rather than a surface patch.
Freeze-thaw cycling along the Wasatch Front widens cracks every winter-to-spring transition, and bench-lot grading in Lindon directs runoff toward some foundations more than others, so a crack that looked minor last fall can grow by spring. Lindon Foundation Pros inspects the crack pattern first, because a stair-step crack in brick behaves differently than a vertical hairline in poured concrete.
What's included
What's Included With Foundation Crack Repair
Typically included: crack inspection and classification, surface prep, injection port setup, epoxy or polyurethane injection, surface finishing. Optional: exterior inspection to identify what's driving the crack (grading, drainage), protective topcoat. Customer prep: clear access to the crack from the basement or crawlspace side and note when you first noticed it growing.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Foundation Crack Repair Process Works
Step 1Crack Inspection
Each crack is examined to determine type, width, and cause.
Step 2Surface Cleaning
Debris and loose material are removed from the crack area.
Step 3Injection Port Setup
Ports are installed along the crack to allow material injection.
Step 4Sealant Injection
Epoxy or polyurethane is injected to fill and bond the crack.
Step 5Surface Finishing
Excess material is removed and the surface is smoothed.
Step 6Final Inspection
The repair is checked to confirm a watertight and stable seal.
Materials
Materials and Methods for Foundation Crack Repair
Material choice depends on whether the crack is structural, leaking, or both.
Epoxy Injection Resin
Bonds structural cracks for added strength and stability, the right call for load-bearing cracks that aren't actively leaking.
Polyurethane Foam Sealant
Expands to fill cracks and block water infiltration, suited to cracks weeping after spring snowmelt.
Injection Ports
Allow controlled delivery of sealant into the crack cavity so the fill reaches the full depth, not just the surface.
Surface Primer
Prepares concrete surfaces for proper material adhesion before injection.
Masonry Patch Compound
Used to finish and blend repaired surface areas on brick or block foundations.
Protective Topcoat
Applied to shield the repaired area from moisture exposure through future freeze-thaw cycles.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Foundation Crack Repair Take?
Most crack repairs are a same-day job unless multiple cracks or access issues are involved.
- 01
Inspection and classification
same day - 02
Surface prep and port setup
1–2 hours - 03
Injection
a few hours per crack
- 04
Curing before finishing
same daya few hours
- 05
Multiple cracks on one wall
same daystill typically
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and Codes for Foundation Crack Repair
Permit rules vary by scope, confirm specifics with the Utah County building department before work starts.
| Typically needs a permit | Often no permit |
|---|---|
| Crack repair tied to a documented settlement issue requiring structural correction | Isolated epoxy or polyurethane injection on a single crack |
| Work combined with piering or underpinning on the same wall | Interior surface finishing and sealant application |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Foundation Crack Repair
| DIY | Hire a pro |
|---|---|
| Monitoring a stable hairline crack that hasn't changed in size | A crack that's visibly widened year over year |
| Applying surface caulk to a cosmetic shrinkage crack with no water intrusion | Stair-step cracking in brick or block, which often signals settlement |
| Taking dated photos to track whether a crack is growing | Any crack that's actively leaking after rain or snowmelt |
| — | Surface caulk only bridges the opening at the face of the wall, it doesn't seal the crack's full depth the way epoxy or polyurethane injection does |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and After Foundation Crack Repair Results
Before 
After
FAQs
Foundation Crack Repair FAQs
How much does foundation crack repair cost in Lindon?
Cost depends on crack length, depth, and whether epoxy or polyurethane fits the situation. Most single-crack jobs are a modest line item compared to piering.
How long does crack injection take?
A few hours per crack , often finished same day as the inspection.
Do I need a permit for crack injection?
Usually not for an isolated crack repair. If the crack is tied to a broader settlement issue needing structural correction, a permit may apply.
Can I just caulk a foundation crack myself?
Surface caulk can hold back minor moisture temporarily but doesn't seal the crack through its full depth. If there's any hydrostatic pressure behind the wall, caulk tends to fail again within a season or two.
Is a stair-step crack in brick serious?
It can be. Stair-step cracks often follow mortar joints and usually point to foundation settlement rather than simple shrinkage. Worth having inspected rather than assumed cosmetic.
When should I call about a foundation crack near me?
Call if the crack has grown noticeably over a year, if it's leaking, or if it follows a stair-step pattern in brick or block.
What affects crack repair pricing?
Crack length, depth, and whether epoxy or polyurethane foam is the right material for the situation.
How do I prepare for a crack repair visit?
Clear access to the crack and have any photos ready showing how it's changed, especially across a winter-to-spring season if you've got them.
Next step
Get a Foundation Crack Repair Estimate in Lindon
Call (435) 325-2652 or request a free estimate and we'll tell you honestly whether that crack needs injection or just monitoring.
More services
Other Foundation Repair services
Foundation Repair
Foundation repair in Lindon using piering, crack injection, and wall stabilization matched to Utah County soil. Free estimates, no pressure.
Piering and Underpinning
Piering and underpinning in Lindon stops foundation settlement with steel or helical piers driven to stable soil. Free estimates.
Wall Stabilization
Wall stabilization in Lindon fixes bowing or cracking basement walls with anchors and carbon fiber straps. Free estimates available.
Ask about Foundation Crack Repair
Tell us about the project and how to reach you.